Publications

These are the publications of 2006:

PhD thesis

  • Andreykiv, A (2006, oktober 17). Simulation of bone ingrowth. PhD Thesis, Technische Universiteit Delft (144 pag.) (ISBN 90-9021020-2). Prom./coprom.: Prof.dr.ir. A van Keulen.
  • Bana, IV (2006, juni 13). Manufacturing of High Precision Bores. PhD Thesis, Technische Universiteit Delft (169 pag.) (ISBN 90-9020708-2). Prom./coprom.: Prof.dr.ing. B Karpuschewski & J Kundrak.
  • Langelaar, M (2006, december 15). Design Optimization of Shape Memory Alloy Structures. PhD Thesis, Technische Universiteit Delft (402 pag.) (ISBN 90-9021347-3). Prom./coprom.: Prof.dr.ir. A van Keulen.
  • Vries, R de (2006, december 18). Robust control through signal constraints. PhD Thesis, Technische Universiteit Delft (393 pag.) (ISBN 90-9021429-1). Prom./coprom.: Prof.dr.ir. M Verhaegen. D. Dodou

Journal paper - letter to the editor

  • Bars, R, Colaneri, P, Souza, L de, Dugard, L, Allgower, F., Kleimenov, A & Scherer, CW (2006). Theory, algorithms and technology in the design of control systems. Annual reviews in control, (ISSN 1367-5788), 30, 19-30.
  • Beek, A van & Ostayen, RAJ van (2005). The design of partially grooved externally pressurized bearings. Tribology international, (ISSN 0301-679X), 39, 833-838.
  • Conza, N (2005). Ultrasound detection system for musculoskeletal disorders. Experimental techniques, (ISSN 0732-8818), 29, 54-57.
  • Conza, N & Rixen, DJ (2006). Experimental modal analysis on a human specimen: Lessons learned. Experimental techniques, (ISSN 0732-8818), 30(6), 51-55.
  • Driel, WD van, Sluis, O van der, Yang, DG, Ubachs, RLJM, Zenz, C, Aflenzer, G & Zhang, GQ (2006). Reliability Modelling for Packages in Flexible End-Products. Microelectronics reliability, (ISSN 0026-2714), 46, 1880-1885.
  • Fan, XJ, Zhou, J, Zhang, GQ & Ernst, LJ (2005). A Micromechanics-Based Vapor Pressure Model in Electronic Packages. Journal of electronic packaging, (ISSN 1043-7398), 127, 262-267.
  • Halang, WA, Sanz, R, Babuska, R & Roth, H (2006). Information and communication technology embraces control status report prepared by the IFAC coordinating committee on computers, cognition and communication. Annual reviews in control, (ISSN 1367-5788), 30, 31-40.
  • He, Y, Li, F, Shi, R, Zhang, GQ, Ernst, LJ, Zhang, J & Song, ZT (2005). Geometry Sensitivity Analyses of Microstructures of IC Packages on Passivation Cracking. Key engineering materials, (ISSN 1013-9826), 297-300, 819-824.
  • Henneken, VA, Tichem, M & Sarro, PM (2006). In-package MEMS-based thermal actuators for micro-assembly. Journal of micromechanics and microengineering, (ISSN 0960-1317), 16(6), S107-S115.
  • Hoogstrate, AM, Susuzlu, T & Karpuschewski, B (2006). High Performance Cutting with Abrasive Waterjets beyond 400 MPa. Cirp annals-manufacturing technology, (ISSN 0007-8506), 55(1).
  • Iftime, OV, Kaashoek, M & Sasane, AJ (2005). A Grassmannian band method approach to the Nehari-Takagi problem. Journal of mathematical analysis and applications, (ISSN 0022-247X), 97-115.
  • Iftime, OV, Zwart, HJ & Curtain, R.F. (2005). A representation of all solution of the control algebraic riccati equation for infinite-dimensional systems. International journal of control, (ISSN 0020-7179), 78(7), 505-520.
  • Jansen, KMB, Gonda, V, Ernst, LJ, Bressers, HJL & Zhang, GQ (2005). State-of-the-Art of Thermo-Mechanical Characterization of Thin Polymer Films. Journal of electronic packaging, (ISSN 1043-7398), 127, 530-536.
  • Kraker, A de, Ostayen, RAJ van & Rixen, DJ (2006). Calulation of Stribeck curves for (water) lubricated journal bearings. Tribology international, (ISSN 0301-679X), 40(40), 459-469.
  • Lau, GK & Du, H (2006). A piesoelectric quad-morph actuated suspension for hard disk drives. Journal of micromechanics and microengineering, (ISSN 0960-1317), 16, 1833-1840.
  • Lau, GK, Goosen, JFL, Keulen, F van, French, PJ & Sarro, PM (2006). Actuated elastometers with rigid vertical electrodes. Journal of micromechanics and microengineering, (ISSN 0960-1317), 16(6), 35-44.
  • Lebedev, AV, Lomonova, EA, Laro, DAH & Put, A van der (2006). Optimal Design Strategy for a Novel Linear Electromechanical Actuator. Electrical engineering in Japan, (ISSN 0424-7760), 126(10), 1-6.
  • Lopez Lena Estrada, R & Scherpen, JMA (2006). Energy functions for dissipativity-based balancing of discrete-time nonlinear systems. Mathematics of control signals and systems, (ISSN 0932-4194), 345-368.
  • Mohanty, P & Rixen, DJ (2006). Modified ERA method for operational modal analysis in the presence of harmonic excitations. Mechanical systems and signal processing, (ISSN 0888-3270), 20(1), 114-130.
  • Peijnenburg, ATA, Vermeulen, JPM & Eijk, J van (2006). Magnetic levitation systems compared to conventional bearing systems. Microelectronic engineering, (ISSN 0167-9317), 83, 1372-1375.
  • Pi Vu Ngoc & Hoogstrate, AM (2006). Cost optimization of Abrasive Blasting Systems: A New and Effective Way for Using Blasting Nozzles. Key engineering materials, (ISSN 1013-9826), 329, 323-328.
  • Ping, Y, Ning Bo, L., Daoguo, Y. & Ernst, LJ (2006). Sliding simulation for adhesion problems in micro gear trains based on an atomistic simplified model. Microsystem technologies-micro-and nanosystems-information storage and processing systems, (ISSN 0946-7076), 1-7.
  • Rochus, V, Rixen, DJ & Golinval, JC (2006). Coupled Electro-Mechanics Simulation Methodology of the Dynamic Pull-in in Micro-systems. Sensor Letters, (ISSN 1546-198X), 4(2), 206-213.
  • Rochus, V, Rixen, DJ & Golinval, JC (2005). Electrostatic coupling of MEMS structures: transient simulations and dynamic pull-in. Nonlinear analysis-theory methods & applications, (ISSN 0362-546X), 63, 1619-1633.
  • Rochus, V, Rixen, DJ & Golinval, JC (2005). Monolithic modelling of electro-mechanical coupling in micro-structures. International journal for numerical methods in engineering, (ISSN 0029-5981), 65, 461-493.
  • Roosmalen, AJ van & Zhang, GQ (2006). Reliability challenges in the nanoelectronics era. Microelectronics reliability, (ISSN 0026-2714), 46, 1403-1414.
  • Scherer, CW, Gelder, E. de, Wal, M van de, Hol, CWJ & Bosgra, OH (2006). Nominal and robust feedforward design with time domain constraints applied to a wafer stage. Journal of dynamic systems measurement and control-transactions of the, (ISSN 0022-0434), 128(2), 204-215.
  • Thakkar, DB & Ganguli, R (2006). Single-crystal piezoceramic actuation for dynamic stall suppression. sensors and actuators, 128, 151-157.
  • Thakkar, DB & Ganguli, R (2006). Use of single crystal and soft piezoceramics for alleviation of flow separation induced vibration in a smart helicopter rotor. Smart materials & structures, (ISSN 0964-1726), 15, 331-341.
  • Ubachs, RLJM, Sluis, O van der, Driel, WD van & Zhang, GQ (2006). Multiscale modelling of multilayer substrates. Microelectronics reliability, (ISSN 0026-2714), 46, 1472-1477.
  • Wang, Z, Lau, GK, Zhu, W & Chao, C. (2006). Influence of Test Capacitor Features on Piezoelectric and Dielectric Measurement of Ferroelectric Films. IEEE Transactions on ultrasonics ferroelectrics and frequency control, (ISSN 0885-3010), 53(1), 15-22.

Proceedings

  • Achtsnick, M, Forster, R, Wardenaar, RPS & Hoogstrate, AM (2006). Strategies to increase the Aspect Ratio of Micro Structures in Abrasive Blasting. In P. Prof. Atherton & E. Prof. Brinksmeier (Eds.), Proceedings of the 6th Euspen International Conference (pp. 4-7). Wenen: Euspen (ISBN 0-9553082-0-8).
  • Babuska, R, Busoniu, IL & De Schutter, B (2006). Reinforcement learning for multi-agent systems. In Marik,V. & Zurawski,R. (Eds.), Proceedings of the ETFA . Prague, Czech: IEEE (ISBN 1-4244-0681-1).
  • Bana, IV, Karpuschewski, B, Kundrak, J & Hoogstrate, AM (2006). Thermal Distortions in the Machining of Small Bores. In s.e. (Ed.), Proceedings of AMPT 2006 (pp. 1-4). Las Vegas: Ohio University.
  • Beek, A van & Ostayen, RAJ van (2006). Viscoelastic Behavior of Soft Layered EHL Curved Slider Bearings. In Wilfried J. Bartz (Ed.), Automotive and Industrial Lubrication (pp. 120-126). Esslingen: s.l. (ISBN 3-924813-62-0).
  • Blom, RS, Hof, PMJ van den, Achtsnick, M & Langen, HH (2006). Model-based Indirect Force Measurement for Micro-milling using Active Magnetic Bearing Spindles. In E.H.W.A. Janssen (Ed.), Philips Precision Technology Conference 2006 (pp. 129-130). Eindhoven: Philips Electronics b.v..
  • Blom, RS, Hof, PMJ van den, Achtsnick, M & Langen, HH (2006). Model-based Indirect Force Measurement for Micro-milling using Active Magnetic Bearing Spindles. In s.n. (Ed.), NanoMicroNed symposium II (pp. 127-127). Eindhoven: TU Eindhoven.
  • Blom, RS, Achtsnick, M, Hof, PMJ van den & Langen, HH (2006). Monitoring and Control of Micro-Manufacturing Processes. In Bram de Jager & Gjerrit Meinsma (Eds.), 25th Benelux Meeting on Systems and Control (pp. 144-144). Eindhoven: TU Eindhoven (ISBN 90-386-2558-8).
  • Borges, J, Verdult, V, Verhaegen, MHG & Botto, MA (2006). On the use of composite local models for nonlinear system identification applied to systems biology. In Botto,M.A. (Ed.), Proceedings of Controlo 2006 . Lisbon, Portugal: Controlo.
  • Borges, J, Verdult, V, Verhaegen, MHG & Botto, MA (2006). Subspace identification of a two-tank hybrid system. In Botto,M.A. (Ed.), Proceedings of C . Lisbon, Portugal: Controlo.
  • Conza, N, Soethoudt, AA, Vlaanderen, E & Rixen, DJ (2006). In vivo Bone Vibration Measurement by Ultrasound. In sn (Ed.), A conference & Exposition on Structural Dynamics (pp. 1-5). St. Louis, Missouri: IMAC.
  • Demetriou, MA & Iftime, OV (2005). Finite horizon optimal control of switched distributed parameter systems with moving actuators. In s.n. & s.n. (Eds.), American control conference. ACC 2005. Proceedings Proceedings of the American Control Conference. Portland, Oregon: ee.washington.
  • Derkx, JM, Saurwalt, JJ, Hoogstrate, AM & Karpuschewski, B (2006). Development for an On-Machine Profiling Device for Diamond Grinding Wheels. In s.e. (Ed.), Proceedings of AMPT 2006 (pp. 1-4). Las Vegas: Ohio University.
  • Dietz, SG, Scherer, CW & Huygen, W (2006). Linear parameter-varying controller synthesis using matrix sum-of squares. In Oliveira,A. (Ed.), Proceedings of the XII Latin-American congress on automatic control . Salvador, Bahia Brasil: CLCA.
  • Dietz, SG & Scherer, CW (2006). Relaxations of robust linear programs and verification of exactness. In Bernussou,J. (Ed.), Proceedings of the 5th IFAC symposium on robust control design 'Rocond 2006' . Toulouse, France: IFAC.
  • Driel, WD van, Hochstenbach, HP & Zhang, GQ (2006). Design for Reliability of Wafer Level Packages. In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Micro-Systems, EuroSimE 2006 (pp. 1-5). Como, Italy: EuroSimE (ISBN 1-4244-0276X).
  • Driel, WD van, Bressers, HJL, Janssen, JHJ, Bielen, JA, Yan, X, Gils, MAJ van, Stevens, PMP, Habets, PJJHA, Zhang, GQ & Ernst, LJ (2005). Driving mechanisms of delamination related reliability problems in exposed pad packages. In Ernst, LJ, Zhang, GQ, Rodgers, P, Meuwissen, M, Marco, S & Saint Leger, O de (Eds.), Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, Proceedings of EuroSIME 2005 (pp. 183-189). Berlin, Germany: IEEE (ISBN 0-7803-9062-8).
  • Driel, WD van (2006). Facing the Challenge of Designing for Cu/Low-k Reliability. In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE 2006 (pp. 1-5). Como, Italy: EuroSimE (ISBN 1-4244-0272X).
  • Driel, WD van, Grech, AM, Hauck, T, Schmadlak, I, Zhang, X & Orain, S (2006). Virtual Prototyping based Design Optimization of the Substrate, Leadframe, and Flip Chip Package Families with Low-k Technology. In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE 2006 (pp. 1-5). Como, Italy: EuroSimE (ISBN 1-4244-0272X).
  • Ellenbroek, RML, Verhaegen, MHG, Doelman, N, Hamelinck, R, Rosielle, N & Steinbuch, M (2006). Distributed control in adaptive optics deformable mirror and turbulence modeling. In Calia,D. Brent,L. & Ellerbroek,B.L. (Eds.), Proceedings of Spie (pp. 1-12). 2006: SPIE.
  • Ernst, LJ, Jansen, KMB, Saraswat, MK, Zhang, GQ, Yang, D, Hof, C van t & Bressers, HJL (2006). Fully Cure-Dependent Modelling and Characterization of EMC's with Application to Package Warpage Simulation. In sn (Ed.), Proceedings 2006 11th International Symposium on Advanced Packaging Materials: Processes, Properties, and Interfaces (pp. 23-27). Atlanta, GA, USA: IEEE (ISBN 1-4244-0260-3).
  • Ernst, LJ, Jansen, KMB, Saraswat, MK, Hof, C van t, Zhang, GQ, Yang, DG & Bressers, HJL (2006). Fully Cure-Dependent Modeling and Characterization of EMC's with Application to Package Warpage Simulation. In Sheng Liu (Ed.), Proceedings of 2006 7th International Conference on Electronics Packaging Technology (pp. 123-129). Shanghai, China: Institute of Electrical and Electronics Engineers, Inc. (ISBN 1-4244-0620-X).
  • Falat, T, Wymyslowski, A, Kolbe, J., Jansen, KMB & Ernst, LJ (2006). Numerical Approach to Characterization of Thermally Conductive Adhesives. In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE 2006 (pp. 1-7). Como, Italy: EuroSimE (ISBN 1-4244-0276X).
  • Fransen, SHJA & Rixen, DJ (2006). Pendulum mode control in the dynamic analysis of lift-off of launchers. In C.A. Mota Soares (Ed.), IIIEuropean Conference on Computational Mechanics (pp. 1-13). Lisbon: ECCM.
  • Garcia-Canseco, E, Ortega, R, Scherpen, JMA & Jeltsema, D (2006). Power shaping control of nonlinear systems: A benchmark example. In Fujimoto,K Bullo,F. (Ed.), 3rd IFAC workshop on lagrangian and hamiltonian methods for nonlinear control (pp. 81-86). Nagoya, Japan: IWLHM.
  • Groot Wassink, MB, Zollner, F, Bosgra, OH & Koekebakker, SH (2006). Improving the drop-consistency of an inkjet printhead using meniscus-based iterative learning control. In Katzuhko,T. (Ed.), proceedings of the conference on control applications (pp. 2830-2835). Munich, Germany: IEEE (ISBN 0-7803-9796-7).
  • Groot Wassink, MB, Bosgra, OH & Koekebakker, SH (2006). Minimization of cross-talk for an inkjet printhead using mimo ilc. In Gonzalez O.R. (Ed.), Proceedings of the 2006 American control conference (pp. 964-969). Minneapolis, Minnesota USA: ACC (ISBN 1-4244-0210-7).
  • Groot Wassink, MB, Bosgra, OH, Koekebakker, SH & Slot, M (2006). Minimizing resedual vibrations and cross-talk for inkjet printheads using ILC designed simplified actuation pulses. In Werner Zapka,X (Ed.), Proceedings of the international conference on digital printing technologies (pp. 69-74). Denver, Colorado, USA: DPT.
  • Gurav, SP, Langelaar, M & Keulen, F van (2006). Uncertainty-based Design Optimization of Shape Memory Alloy Microgripper using Combined Cycle-based Alternating Anti-optimization and Nested Parallel Computing. In Herskovits, J., Mazorche, S. & Canelas, A. (Eds.), Proceedings 6th World Congress of Structural Multidisciplinary Optimization (pp. 1-10). Rio de Janeiro, Brazil: ISSMO (ISBN 85-285-0070-5).
  • Hallouzi, R, Verhaegen, MHG, Babuska, R & Kanev, SK (2006). Model weight and state estimation for multiple model systems applied to fault detection and identification. In B. Ninness (Ed.), Proceedings of the 14th IFAC symposium on system identification (pp. 648-653). New Castle, Australie: IFAC.
  • Hallouzi, R, Verhaegen, MHG & Kanev, SK (2006). Model weight estimation for FDI using convex fault models. In Korbicz,J. (Ed.), Proceedings of the 6th IFAC symposium on fault detection, supervision and safety of technical processes (pp. 847-852). Beijing, China: ISFD.
  • He, YT, Li, HP, Li, F, Wang, L, Zhang, GQ & Ernst, LJ (2006). Effects of aeronautical conditions on passivation cracking of micro-structures of IC packages. In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Micro-Systems, EuroSimE 2006 (pp. 1-4). Como, Italy: EuroSimE (ISBN 1-4244-0276X).
  • He, YT, Li, HP, Li, F, Shi, R, Zhang, GQ & Ernst, LJ (2006). Passivation Cracking Analyses of ICs for Different Fixing Position under the Aeronautical Working Conditions. In Sheng Liu (Ed.), Proceedings of 2006 7th International Conference on Electronics Packaging Technology (pp. 755-759). Shanghai, China: Institute of Electrical and Electronics Engineers, Inc. (ISBN 1-4244-0620-X).
  • Helvoirt, J van, Bosgra, OH, Jager, B de & Steinbuch, M (2005). Approximate realization with time delay. In Patel,R. (Ed.), Proceedings of the 2005 IEEE conference on control applications (pp. 1534-1539). Toronto, Canada: IEEE (ISBN 0-7803-9354-6).
  • Henneken, VA, Tichem, M & Sarro, PM (2006). Improved Thermal U-beam Actuators for Micro-assembly. In s.l (Ed.), XX Eurosensors (pp. 1-4). Göteborg: Chalmers (= TU Göteborg) (ISBN 91-631-9281-0).
  • Henneken, VA & Tichem, M (2006). Tolerance Budgeting in a Novel Coarse-Fine Strategy for Micro-Assembly. In Svetan Ratchev (Ed.), Precision Assembly Technologies for Mini and Micro Products (pp. 155-166). New York: Springer Science+Business Media Inc. (ISBN 0-387-31276-5).
  • Hinnen, KJG, Verhaegen, MHG & Doelman, N (2006). Adaptive Optics H2-Optimal Control Design Applied on an Experimental Setup. In Calia,D.B. Ellerbroek, B.L. (Ed.), Proceedings of SPIE (pp. 1-12). Orlando, Florida, USA: SPIE.
  • Hoogstrate, AM & Pi Vu Ngoc (2006). Cost Optimization for Multiple-head AWJ Cutting. In P. Longman (Ed.), 18th International Conference on Water Jetting (pp. 251-264). Cranfield: BHR Group Limited (ISBN 1-85598-080-0).
  • Iftime, OV & Verhaegen, MHG (2005). A Kalman filter-based stable dynamic inversion for discrete-time linear time-varying systems. In P Horacek, M Simandl & P Zitek (Eds.), Proceedings of 16th IFAC World Congress . Prague, Czech Republic: IFAC.
  • Iftime, OV & Verhaegen, MHG (2005). Model-based learning control with non-repetitve initial conditions. In Kuhnert,K.D. and Stommel,M. (Ed.), Intenational workshop on automatic learning and real-time (pp. 49-56). Siegen, Germany: Kuhnert,K.D. and Stommel,M..
  • Iftime, OV & Demetriou, M.A. (2005). Optimal control for switched distributed parameters systems with application to the guidance of a moving actuator. In P Horacek, M Simandl & P Zitek (Eds.), Proceedings of 16th IFAC World Congress . Prague, Czech Republic: IFAC.
  • Iftime, OV, Sandovici, A & Golo, G (2005). Tools for analysis of Dirac structures on Banach spaces. In EF Camacho (Ed.), Proceedings of the 44th IEEE Conference on Decision and Control and European Control Conference ECC 2005 (pp. 3856-3861). Seville, Spain: CDCECC.
  • Jansen, KMB, Ernst, LJ & Bressers, HJL (2006). Effect of Chemistry on Viscoelastic Properties of Moulding Compounds. In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE 2006 (pp. 1-6). Como, Italy: EuroSimE (ISBN 1-4244-0272X).
  • Jansen, MY, Vries, JWC de & Driel, WD van (2006). An Efficient Method for Assessing Board Level Reliability for Micro-electronic Packages using Combined Experimental - Numerical Techniques. In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE 2006 (pp. 1-5). Como, Italy: EuroSimE (ISBN 1-4244-0276X).
  • Kanev, SK & Verhaegen, MHG (2006). Multiple model weight estimation for models with no common state. In Stoustrup,J. (Ed.), Preprints of the 6th IFAC Symposium on fault detection, supersvision and safety of technical processes (pp. 637-642). Beijing, China: IFAC.
  • Kimman, MH, Langen, HH, Eijk, J van & Polinder, H (2006). Design of a Novel Miniature Spindle Concept with Active Magnetic Bearings using the Gyroscopic Stiffening Effect. In sn (Ed.), the 10th International Symposium On Magnetic Bearings (pp. 1-4). Martigny: ISMB.
  • Klerk, D de & Rixen, DJ (2006). The Frequency Based Substructuring (FBS) Method reformulated according to the Dual Domain Decomposition Method. In sn (Ed.), A conference & Exposition on Structural Dynamics (pp. 1-14). St. Louis, Missouri: IMAC.
  • Koroglu, H & Scherer, CW (2006). Robust stability analysis against perturbations of smoothly time-varying parameters. In Misra,P. (Ed.), Proceedings of the 45th IEEE conference on decision and control (pp. 2895-2900). San Diego: IEEE (ISBN 1-4244-0171-2).
  • Köroglu, H & Scherer, CW (2006). Robust stability analysis tests for linear time-varying perturbations with bounded rates-of-variation. In Bernussou,J. (Ed.), Proceedings of the 5th IFAC symposium on robust control design 'Rocond 2006' . Toulouse, France: IFAC.
  • Kose, E & Scherer, CW (2006). Gain-scheduled control using dynamic integral quadratic constraints. In Bernussou, J. (Ed.), Proceedings of the 5th IFAC symposium on robust control design 'Rocond 2006' . Toulouse, France: IFAC.
  • Kraker, A de, Ostayen, RAJ van & Rixen, DJ (2006). Fluid-structure interaction in FEM Journal bearing simulations. In C.A, Mota Soares (Ed.), Solids, Structures and Coupled Problems in Engineering (pp. 1-16). Lisbon: ECCM.
  • Kraker, A de & Ostayen, RAJ van (2006). A multiscale method modeling surface texture effects. In s.n. (Ed.), International Joint Tribology Conference (pp. 1-13). San Antonio Texas: IJTC (ISBN 0-7918-3789-0).
  • Kraker, A de, Ostayen, RAJ van & Beek, A van (2006). Calculation of Stribeck Curves for Journal Bearings. In Wilfried J. Bartz (Ed.), Automotive and Industrial Lubrication (pp. 49-58). Esslingen: sn (ISBN 3-924813-62-0).
  • Kregting, R, Silfhout, RBR van, Sluis, O van der, Engelen, RAB, Driel, WD van & Zhang, GQ (2006). An Experimental-Numerical Study of Metal Peel Off in Cu/low-k Back-End Structures. In Sheng Liu (Ed.), Proceedings of 2006 7th International Conference on Electronics Packaging Technology (pp. 210-215). Shanghai, China: Institute of Electrical and Electronic Engineers, Inc. (ISBN 1-4244-0620-X).
  • Kurniawan, I, Tichem, M & Bartek, M (2006). Morphological Classification of Hybrid Microsystems Assembly. In S Ratchev (Ed.), Precision Assembly Technologies for Mini and Micro Products (pp. 133-147). New York: Springer Science+Business Media (ISBN 0-387-31276-5).
  • Lang, D & Tichem, M (2006). Design and Experimental Evaluation of an Electrostatic Micro-Gripping System. In Svetan Ratchev (Ed.), Precision Assembly Technologies for Mini and Micro Products (pp. 33-42). New York: Springer Science+Business Media Inc. (ISBN 0-387-31276-5).
  • Lang, D, Tichem, M & Blom, RS (2006). The Investigation of Intermediates for Phase Changing Micro-gripping. In Hanner Prof. Bleuler & Philippe Prof. Lutz (Eds.), 5th Int. Workshop on Microfactories (IWMF 2006) . Besancon: Lab-CNRS-UMR.
  • Langelaar, M, Yoon, GH, Gurav, SP, Kim, YY & Keulen, F van (2005). Analysis and Design Techniques for Shape Memory Alloy Microactuators for Space Applications. In Saillen, N. & Marchand, L. (Eds.), Proceedings 5th ESA Round Table on Micro/Nano Technologies for Space (pp. 1-7). Noordwijk, NL: ESA/ESTEC.
  • Langelaar, M & Keulen, F van (2006). Sensitivity Analysis and Optimization of a Shape Memory Alloy Gripper. In B.H.V. Topping, G. Montero & R. Montenegro (Eds.), Proceedings of the Eighth International Conference on Computational Structures and Technology (pp. 1-20). Las Palmas de Canaria, Spain: Civil-Comp Press (ISBN 1-905088-08-6).
  • Langelaar, M & Keulen, F van (2006). Sensitivity Analysis of Shape Memory Alloy Shells. In Mota Soares, C.A., Martins, J.A.C., Rodrigues, H.C., Ambrosio, J.A.C., Pina, C.A.B., Mota Soares, C.M., Pereira, E.B.R. & Folgado, J. (Eds.), Proceedings III European Conference on Computational Mechanics. Solids, Structures and Coupled Problems in Engineering, (pp. 1-20). Lisbon, Portugal: Springer (ISBN 1-4020-4994-3).
  • Langelaar, M, Yoon, GH, Kim, YY & Keulen, F van (2006). Topology Optimization of Shape Memory Alloy Actuators using Element Connectivity Parametriztion. In Herskovits, J., Mazorche, S. & Canelas, A. (Eds.), Proceedings 6th World Congress of Structural and Multidisciplinary Optimization (pp. 1-10). Rio de Janeiro, Brazil: ISSMO (ISBN 85-285-0070-5).
  • Langen, HH (2006). Microfactory research topics in the Netherlands. In sn (Ed.), 5th Interantional workshop on Microfactories (pp. 1-4). Besancon: IWMF.
  • Laro, DAH, Porck, T, Spronck, JW & Eijk, J van (2006). Control of a magnetically levitated slider with nm-precision. In Genta, G. & Bleuler, H. (Ed.), the tenth International Symposium on Magnetic Bearing (pp. 1-6). Martigny: ISMB.
  • Laro, DAH, Porck, T, Spronck, JW, Eijk, J van & Lebedev, AV (2006). Design of a magnetically levitated nm-resolution linear slider. In E. Brinksmeier (Ed.), Proceedings of the 6th euspen International conference (pp. 1-4). Euspen: SPEN (ISBN 0-9553082-0-8).
  • Lau, GK, Goosen, JFL, Keulen, F van, Chu Duc, T & Sarro, PM (2006). Electrostatically Squeezed Elastometers for Out-Of-Plane Microactuation. In Liu, A.Q. & White, T. (Eds.), Proceedings Asia-Pacific Conference of Transducers and Micro-Nano Technology (pp. 1-4). Singapore: apcot.
  • Lau, GK, Chu Duc, T, Goosen, JFL, Keulen, F van & Sarro, PM (2006). In-Plane Thermal Unimorph Using Confined Polymers. In Morgan, H. (Ed.), Technical Digest 17th MicroMechanics Europe (pp. 117-120). Southampton: University of Southampton (ISBN 0854328483).
  • Lebedev, AV, Lomonova, EA, Laro, DAH & Put, A van der (2006). Selection of Soft Magnetic Materials for a High Precision Positioning System Design. In SN (Ed.), ICEM (pp. 1-4). Chania: ICEM.
  • Li, P, Blom, RS, Oosterling, JAJ & Achtsnick, M (2006). Design Requirements of an Advanced Micromilling Setup. In M.N. Morgan & I.D. Jenkinson (Eds.), Advances in Manufacturing Technoglogy – XXX; Proceedings of the 4ht International Conference on Manufacturing Research (ICMR 2006) (pp. 403-407). Liverpool: Liverpool John Moores University (ISBN 0-9553215-0-6).
  • Li, Q, Beenakker, CIM & Vath III, CJ (2006). A Novel Decapsulation Technique for Failure Analysis of Integrated Circuits. In S Liu (Ed.), ICEPT2006 Proceedings of 2006 7th International Conference on Electronics Packaging Technology (pp. 1-5). Shanghai, China: Institute of Electrical and Electronics Engineers, Inc. (ISBN 1-4244-0620-X).
  • Lopez Lena Estrada, R & Scherpen, JMA (2006). Nonlinear behavioral balancing by extension of lie semigroups. In Fujimoto,K & Bullo,F. (Ed.), 3rd IFAC workshop on langrangian and hamiltonian methods for nonlinear control (pp. 215-220). Nagoya, Japan: IWLHM.
  • Ma, X, Jansen, KMB & Ernst, LJ (2006). Moisture Effects on the Creep of Thermosetting IC Packaging Polymers. In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE 2006 (pp. 1-5). Como, Italy: EuroSimE (ISBN 1-4244-0276X).
  • Ma, X, Jansen, KMB, Zhang, GQ & Ernst, LJ (2006). Filler Contents Effects on the Moisture Absorption and Viscoelasticity of Thermosetting IC Packaging Polymers. In Sheng Liu (Ed.), Proceedings of 2006 7th International Conference on Electronics Packaging Technology (pp. 161-165). Shanghai. China: Institute of Electrical and Electronics Engineers, Inc. (ISBN 1-4244-0620-X).
  • Ma, X, Jansen, KMB, Zhang, GQ & Ernst, LJ (2006). Hygroscopic Effects on Swelling and Viscoelasticity of Electronic Packaging Epoxy. In Sheng Liu (Ed.), Proceedings of 2006 7th International Conference on Electronics Packaging Technology (pp. 262-266). Shanghai, China: Institute of Electrical and Electronics Engineers, Inc. (ISBN 1-4244-0620-X).
  • Mandal, G, Mishra, G, Driel, WD van & Zhang, GQ (2006). The Effects of Packaging on RFICs. In Sheng Liu (Ed.), Proceedings of 2006 7th International Conference on Electronics Packaging Technology (pp. 166-172). Shanghai, China: Institute of Electrical and Electronics Engineers, Inc. (ISBN 1-4244-0620-X).
  • Meng, X, Babuska, R, Busoniu, IL, Chen, Y & Tan, W (2006). An improved multiagent reinforcement learning algorithm. In B. Werner (Ed.), Proceedings of the 2005 IEEE/WIC/ACM International Conference on Intelligent Agent Technology (pp. 1-7). Compiegne, France: IEEE.
  • Noll, E van der, Boom, T van den & Klaassens, JB (2006). Time optimal control of a mobile robot using a neural network: A chebyshev polinomial approach. In Botto, M. (Ed.), Proceedings of the 7th Portuguese conference on automatic control (pp. 1). Lissabon: Controlo.
  • Ostayen, RAJ van & Beek, A van (2006). Thermal Properties of the Lemon-Bore Hydrodynamic Bearing. In Wilfried J. Bartz (Ed.), Automotive and Industrial Lubrication (pp. 1-8). Esslingen: sn (ISBN 3-924813-62-0).
  • Overschie, PM, Jabben, L, Schieveen, JP van, Spronck, JW & Eijk, J van (2006). Capacitive Sensing System Design for a rotating AMB with sub-nanometer positioning accuracy. In SN (Ed.), the tenth International Symposium on Magnetic Bearings (pp. 1-6). Martigny: ISMB.
  • Overschie, PM, Jabben, L, Spronck, JW & Eijk, J van (2006). Mechatronic approach to sending system design for an Optical Disc Mastering rotor. In E. Brinksmejer (Ed.), Proceedings of the 6th Euspen International conference (pp. 1-3). Euspen: EIC (ISBN 0-9553082-0-8).
  • Pi Vu Ngoc & Hoogstrate, AM (2006). Cost Calculation for Abrasive Recycling and for Abrasive Comparing for Abrasive Waterjet (AWJ) Cutting Systems. In V.C. Venkatesh & N.S.M. El-Tayeb (Eds.), Manufacturing Science and Technology; ICOMAST 2006 (pp. 153-156). Melaka: Faculty of Engineering and Technology (ISBN 983-42051-1-2).
  • Rieber, JM, Scherer, CW & Allgower, F. (2006). On complexity issues in multiobjective controller design using convex optimization. In Bernussou, J. (Ed.), Proceedings of the 5th IFAC symposium on robust control design 'Rocond 2006' . Toulouse, Frankrijk: IFAC.
  • Rieber, JM, Scherer, CW & Allgower, F. (2006). Robust l1 performance analysis in face of parametric uncertainties. In Misra, P. (Ed.), Proceedings of the 45th IEEE conference on decision and control (pp. 5826-5831). San Diego: IEEE (ISBN 1-4244-0171-2).
  • Rijn, CJM van (2006). Deflection and maximum pressure load of rectangular micro engineered membranes. In Waqar Asrar, Waleed Fekry Faris, Md. Raisuddin Khan, Saheb Nouari, Ahmed Ibrahim Ashour & Sany Izan Ihsan (Eds.), Proceedings International Conference on MEMS and Nanotechnology (pp. 132-141). Kuala Lumpur, Malaysia: ICMN (ISBN 983-42978-0-7).
  • Rinaldis, A, Scherpen, JMA & Ortega, R (2006). Towards power-based control strategies for a class of nonlinear mechanical systems. In F. Bullo & K. Fujimoto (Eds.), 3rd IFAC workshop on lagrangian and hamiltonian methods for nonlinear control (pp. 75-80). Nagoya, Japan: IFAC.
  • Rochus, V, Rixen, DJ & Golinval, JC (2006). Correlation of Experimental and Numerical Results on Electrostatically Actuated Micro-Beams. In NSTI (Ed.), Modeling and Simulation of Microsystems (pp. 1-4). Boston: NSTI (ISBN 0-9767985-9-x).
  • Rochus, V, Rixen, DJ & Golinval, JC (2005). Finite Element Modeling of Electro-Mechanical Coupling in Capactive Micro-Systems. In NSTI (Ed.), Technical Proceedings of the 2005 NSTI Nanotechnology Conference and Trade Show (pp. 704-707). Liege: Natotech 2005 (ISBN 0-967985-4-9).
  • Rochus, V, Rixen, DJ & Golinval, JC (2006). On the Advantages of Using a Strong Coupling Variational Formulation to Model Electro-Mechanical Problem. In s.n. (Ed.), EuroSime 2006 (pp. 1-8). Como: IEEE (ISBN 1-4244-0275-1).
  • Scherer, CW & Kose, E (2006). Robust estimation with dynamic integral quadratic constraints. In Yutaka, Y. (Ed.), Proceedings of the 17th international symposium on mathematical theory of networks and systems (pp. 2234-2250). Kyoto, Japan: ISMT.
  • Scherer, CW & Kose, E (2006). Robust estimation with dynamic integral quadratic constraints. In Yutaka, Y. (Ed.), Proceedings of the 17th international symposium on mathematical theory of networks and systems (pp. 2234-2250). Kyoto, Japan: ISMT.
  • Scherer, CW & Kose, E (2006). Robust H2 estimation with dynamic IQCs; A convex solution. In Misra, P. (Ed.), Proceedings of the 45th IEEE conference on decision and control (pp. 4746-4751). San Diego: IEEE (ISBN 1-4244-0171-2).
  • Scherpen, JMA (2006). Balancing relations between the normalized left and right coprime factorizations of a nonlinear system. In Yutaka, Y (Ed.), Proceedings of the 17th international symposium on mathematical theory of networks and systems (pp. 835-839). Kyoto: ISMT.
  • Scherpen, JMA, Jeltsema, D & Maulny, F (2006). Parallel Damping Injection for the Quarter Car Suspension System. In Yutaka, Y. (Ed.), Proceedings of the 17th International Symposium on Mathematical Theory of Networks and Systems (pp. 148-153). Kyoto, Japan: MTNS.
  • Schwab, AL & Meijaard, JP (2006). Comparison of three-dimentional flexible beam elements for dynamic analysis: Finite element method and absolute nodal coordinate formulation. In ASME 2005 (Ed.), Asme 2005 International Design Engineering Technicl Conference (pp. 1-9). New York: ASME (ISBN 0-7918-3766-1).
  • Silfhout, RBR van, Jansen, MY, Driel, WD van & Zhang, GQ (2006). Designing for 1st and 2nd Level Reliability of Micro-Electronic Packages using Combined Experimental - Numerical Techniques. In sn (Ed.), Proceedings 56th Electronic Components & Technology Conference 2006 (pp. 1-7). San Diego, CA, USA: IEEE (ISBN 1-4244-0152-6).
  • Silfhout, RBR van, Sluis, O van der, Driel, WD van, Janssen, JHJ & Zhang, GQ (2006). Virtual Design and Qualification of IC Backend Structures. In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE 2006 (pp. 1-5). Como, Italy: EuroSimE (ISBN 1-4244-0272X).
  • Sluis, O van der, Engelen, RAB, Driel, WD van, Gils, MAJ van & Silfhout, RBR van (2006). Efficient Damage Sensitivity Analysis of Advanced Cu Low-k Bond Pad Structures Using Area Release Energy. In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE 2006 (pp. 1-8). Como, Italy: EuroSimE (ISBN 1-4244-0276X).
  • Soestbergen, M van, Ernst, LJ, Jansen, KMB, Driel, WD van, Bartek, M & Polyakov, A (2006). Measuring in-thickness mechanical properties of sub micron polymer dielectric films. In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE 2006 (pp. 1-5). Como, Italy: EuroSimE (ISBN 1-4244-0272X).
  • Soestbergen, M van, Ernst, LJ, Jansen, KMB & Driel, WD van (2006). Mechanical Properties of Polymer Dielectric Films at Elevated Temperatures. In Sheng Liu (Ed.), Proceedings of 2006 7th International Conference on Electronics Packaging Technology (pp. 664-667). Shanghai, China: Institute of Electrical and Electronic Engineers, Inc. (ISBN 1-4244-0620-X).
  • Strijp, CJ, Langen, HH & Onosato, M (2006). The Application of a Haptic Interfaces for Virtual Environment and Teleoperator Systems. In sn (Ed.), 14th Symposium in Haptic Interfaces for Virtual Environment and Teleoperator Systems (pp. 1-5). Washington: s.l..
  • Su, J, Zeijl, HW van, Paalvast, SL, Sarro, PM & Eijk, J van (2006). a noval dual-side fabriation method for silicon plate springs with high out-of plane stifness. In SN (Ed.), SAFEconferentie (pp. 394-397). Veldhoven: SAFE (ISBN 90-73461-44).
  • Thijsse, J, Driel, WD van, Gils, MAJ van & Sluis, O van der (2006). Interfacial Adhesion Method for Semiconductor Applications Covering the Full Mode Mixity. In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE 2006 (pp. 1-5). Como, Italy: EuroSimE (ISBN 1-4244-0276X).
  • Thijsse, J, Driel, WD van, Gils, MAJ van & Sluis, O van der (2006). Mixed Mode Bending Test for Interfacial Adhesion in Semiconductor Applications. In IEEE/ECTC (Ed.), Proceedings 56th Electronic Components & Technology Conference 2006 (pp. 1-5). San Diego, CA, USA: IEEE (ISBN 1-4244-0152-6).
  • Tichem, M & Lang, D (2006). A Framework for Specifying and Selecting Micro-Griping Technology. In Engelbert Westkämper (Ed.), First CIRP Int. Seminar on Assembly Systems (pp. 101-105). Stuttgart: Universiteit Stuttgart (ISBN 3-8167-7213-7).
  • Venstra, WJ, Wien, WHA, Spronck, JW, Sarro, PM & Eijk, J van (2005). Microcantilevers inside nanoliter wells. In STW/NWO/EX/IEEE (Ed.), Proceedings of the 8th Annual Workshop on Semiconductors Advandces for Future Electronixs and Sensors (pp. 171-174). Veldhoven: STW2005 (ISBN 90-73461-50-2).
  • Venstra, WJ, Velden, M van der, Spronck, JW & Eijk, J van (2006). Versatile wire configuration for independent actuation of bending and torsion displacements of microcantilevers. In sn (Ed.), IEEE sensors 2005 (pp. 583-587). Irvine: IEEE.
  • Verhaegen, MHG, Hallouzi, R & Kanev, SK (2006). Fault detection and identification using multiple models. In Botto, M. (Ed.), Proceedings of controlo 2006 . Lisbon, Portugal: Controlo.
  • Wang, L, Jansen, KMB, Bartek, M, Polyakov, A & Ernst, LJ (2006). Mechanical Characterization Analysis of a Segmented Silicon Layer on Ultra-thin Polyimide Substrates by Experiment and FE Simulation. In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE 2006 (pp. 1-6). Como, Italy: EuroSimE (ISBN 1-4244-0276X).
  • Wingerden, JW van, Fraanje, PR, Hallouzi, R, Kanev, SK & Verhaegen, MHG (2006). A multipurpose benchmark for fault diagnosis and control of smart structures. In Chua, L.O. & Lu, Q.S. (Ed.), Proceedings of the second international conference on dynamics vibration and control (pp. 241-246). Beijing, China: ICDVC.
  • Xiao, A, Wang, LG, Driel, WD van, Yang, DG, Yuan, CA & Zhang, GQ (2006). Thin Film Interfacial Strength Characterization using Mixed Mode Bending. In Sheng Liu (Ed.), Proceedings of 2006 7th International Conference on Electronics Packaging Technology (pp. 785-789). Shanghai, China: Institute of Electrical and Electronics Engineers, Inc. (ISBN 1-4244-0620-X).
  • Yang, DG, Driel, WD van, Boomen, RWJ van den & Meeuwsen, F (2006). Thermo-Mechanical Virtual Prototyping of Laminate-Based RF System-in-Package Modules. In Sheng Liu (Ed.), Proceedings of 2006 7th International Conference on Electronics Packaging Technology (pp. 41-45). Shanghai, China: Institute of Electrical and Electronics Engineers, Inc. (ISBN 1-4244-0620-X).
  • Yuan, CA, Zhang, GQ, Huang, CS, Yu, CH, Yang, CC, Yang, WK, Yew, MC, Chou, CY & Chiang, KN (2006). Design and Analysis of a novel fan-out WLCSP structure. In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE 2006 (pp. 1-4). Como, Italy: EuroSimE (ISBN 1-4244-0276X).
  • Yuan, CA, Zhang, GQ, Huang, CS, Yu, CH, Yang, CC, Yang, WK, Yew, MC, Nan Han, C & Chiang, KN (2006). Design, Experiment and Analysis of the Solder on Rubber (SOR) structure of WLCSP. In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE 2006 (pp. 1-7). Como, Italy: EuroSimE (ISBN 1-4244-0272X).
  • Zeijl, HW van, Paalvast, SL, Sarro, PM & Eijk, J van (2006). A Noval dual-side fabrication method for Silicon Plate Springs with high ouf-of-plane stiffness. In sn (Ed.), Micromechanics Europe 2006 (pp. 1-8). Southampton: MMEW (ISBN 085432-848-3).
  • Zeoli, M, Keulen, F van & Langelaar, M (2006). Fast reanalysis of Geometrically Nonlinear Problems After Shape Modifications. In Herskovits, J., Mazorche, S. & Canelas, A. (Eds.), Proceedings 6th World Congress of Structural and Multidisciplinary Optimization (pp. 1-11). Rio de Janeiro, Brazil: ISSMO (ISBN 85-285-0070-5).
  • Zhang, GQ, Graef, M & Roosmalen, F van (2006). Strategic Research Agenda of "More than Moore". In Ernst, L.J., Zhang, G.Q., Rodgers, P., Marco, S., Meuwissen, M. & Saint Leger, O. de (Eds.), Proceedings of the 7th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE 2006 (pp. 1-6). Como, Italy: EuroSimE (ISBN 1-4244-0276X).
  • Zhang, GQ, Graef, M & Roosmalen, F van (2006). The Rationale and Paradigm of "More than Moore". In sn (Ed.), Proceedings 56th Electronic Components & Technology Conference 2006 (pp. 151-157). San Diego, CA, USA: IEEE (ISBN 1-4244-0152-6).
  • Zoumpoulidis, T, Wang, L, Bartek, M, Polyakov, A, Jansen, KMB & Ernst, LJ (2006). Mechanical characterization of microelectronics embedded in flexible substrate. In Sheng Liu (Ed.), Proceedings of 2006 7th International Conference on Electronics Packaging Technology (pp. 672-678). Shanghai, China: Institute of Electrical and Electronics Engineers, Inc. (ISBN 1-4244-0620-X).

Book

  • Beek, A van (2006). Advanced Engineering Design. Delft: TU Delft (ISBN 90-810406-1-8).
  • Zhang, GQ, Driel, WD van & Fan, XJ (2006). Mechanics of Microelectronics (Solid Mechanics and its Applications, 141). Dordrecht: Springer (ISBN 1-4020-4934-X).

Book part

  • Babuska, R (2005). An overview of nonlinear identification and control with fuzzy systems. In A.E. Ruano (Ed.), Intelligent control systems using computational intelligence techniques (pp. 1-36). London, UK: IEE (ISBN 0-86341-489-3).
  • Beek, A van & Ostayen, RAJ van (2006). Design of Linear Motor Axes Guided on Monolithic Partially Grooved Air Bearings. In Bojan Lalic (Ed.), Advanced Technologies (pp. 77-90). Mammendorf: V pro literatur Verlag Robert Mayer-Scholz (ISBN 3-86611-197-5).
  • Braaksma, J, Klaassens, JB & Babuska, R (2006). Hybrid control design for a robot manipulator in a shield tunneling machine. In Informatics in control, automation and robotics I (pp. 143-150). Springer (ISBN 1-4020-4136-5).

Referee journal issues

  • Scherer, CW (Ed.). (2006). Automatica, (ISSN 0005-1098), 42(7).
  • Scherer, CW (Ed.). (2006). European journal of control, (ISSN 0947-3580), 12(3).
  • Scherer, CW (Ed.). (2006). Systems & control letters, (ISSN 0167-6911), 55(8).
  • Scherpen, JMA (Ed.). (2006). International journal of robust and nonlinear control, (ISSN 1049-8923), 16(18).
  • Verhaegen, M & De Schutter, B (Eds.). (2006). Automatica, (ISSN 0005-1098), 42(4).

Patent

  • Munnig Schmidt, RH (19-09-2006). Balance mass on reticle stage through belt-drive. no US 7,110,086 B2.
  • Nijsse, GJP & Spronck, JW (11-06-2002). patent nummer US6402118. no NL1022995C.
  • Venstra, WJ (22-09-2004). patent nummer NL1022995C. no NL1022995C.

More publications can be accessed in the METIS database: METIS 

 

© 2014 TU Delft

Metamenu